Picoleaf CLI

Use picoleaf to control Nanoleaf light panels.

Setup

Find Nanoleaf IP: Check router or use mDNS: dns-sd -Z _nanoleafapi

Generate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run:

curl -iLX POST 3. Create config file ~/.picoleafrc: __CODE_BLOCK_0__ Power - picoleaf on - Turn on - picoleaf off - Turn off Brightness - picoleaf brightness <0-100> - Set brightness percentage Colors - picoleaf rgb - Set RGB color (0-255 each) - picoleaf hsl - Set HSL color - picoleaf temp <1200-6500> - Set color temperature in Kelvin Examples - Warm dim light: picoleaf on && picoleaf brightness 30 && picoleaf temp 2700 - Bright blue: picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255 - Turn off: picoleaf off Notes - Default port is 16021 - Token generation requires physical access to the Nanoleaf controller - Multiple commands can be chained with &&`